Custom Wireless Chargers for Businesses
Custom wireless chargers are among the few corporate gifts that end up on the desk and are used daily. Here are the usual models, their power, marking techniques, and indicative prices per unit. From 25 units: you can produce one unit or a thousand.
Power Matters More Than Finish
Almost all promotional wireless chargers use the Qi standard, which distributes charging in segments of 5, 7.5, 10, and 15 W. A 5 W base takes more than twice as long as a 15 W one to fill the same battery, and that determines whether the gift stays on the desk or ends up in a drawer. The real leap is in Qi2: it has a ring of magnets that centres the phone over the coil and delivers up to 15 W to compatible phones, without the typical loss of a poorly aligned flat base. Two limits to inform the team about: charging penetrates cases up to about 3 mm, but doesn't work with metal mounts or rings attached to the phone.
The second criterion is the material. Smooth ABS is the cheapest and allows full-colour UV printing; bamboo, cork, and aluminium are laser engraved, don't lose the logo with use, and withstand the daily handling of a desk better. In our corporate merchandising, we apply the logo small and in a single tone when the material is premium: a 30 to 40 mm engraving on the side is more readable than a large logo printed in the centre of the charging area.
What Can Be Customised
- The logo on the charging surface or the side, with laser engraving on bamboo, cork, and aluminium, or full-colour digital UV printing on ABS.
- The material and colour of the base: ABS, recycled ABS, bamboo, natural cork, aluminium, or leather-like, with the casing in the corporate colour.
- The cable and accompanying accessories: coloured braided USB-C cable, cotton bag, or marked hard case.
- The packaging: box with band, label, and welcome card, as done in a corporate welcome pack.
- The set: each person chooses a model or colour on Pekata's portal, in their language, and receives it without HR needing to request addresses.
Models, Power, and Indicative Prices
| Model | Material and Power | Usual Marking | Indicative Price per Unit |
|---|---|---|---|
| Basic Qi 10 W Base | ABS or recycled ABS, about 10 cm in diameter, USB-C cable included depending on model | Digital UV printing or single-colour screen printing | €6-14 |
| Bamboo or Cork Base | Bamboo or natural cork on non-slip base, output of 10 to 15 W | Laser engraving, in toasted tone on the material itself | €10-20 |
| Qi2 Magnetic Charger 15 W | Aluminium and silicone with magnet ring, 15 W on Qi2 compatible phones | Laser engraving or UV printing | €15-30 |
| Power Bank with Wireless Charging | 10,000 mAh lithium battery, 10 W wireless and USB-C Power Delivery by cable, 200-260 g | UV printing or resin doming | €16-30 |
| 3-in-1 Foldable Station | Aluminium or leather-like for phone, watch, and earbuds: 15 W + 5 W + 3 W, folds for travel | Laser engraving on the base or marking on the case | €25-45 |
| Desk Mat with Qi Charging | PU synthetic leather with 10 W inductive coil, 800 × 400 mm | Laser engraving or single-colour screen printing | €22-40 |
Indicative prices per unit, with the logo already applied and excluding VAT. Improve with volume.
How It's Produced
- Design and Preview: send us the logo in vector format (SVG, PDF, or AI) and, if you only have a PNG, we'll vectorise it. We return the charger already customised on screen, with the actual size and position of the marking, for you to approve before production.
- Production and Marking: laser engraving on bamboo, cork, and aluminium; digital UV printing when the logo has multiple colours or gradients. Produced from 25 units, so the same design works for 15 people or for 800.
- Delivery: to the office in a single shipment, to an event venue, or to each person's address across Europe, with a single invoice. The estimated timeframe is two to four weeks from when you approve the preview; models with lithium batteries usually travel by road and may take a few extra days outside mainland Spain.
When it Works and What to Pair it With
It's a desk gift: perfect for welcoming a new hire, celebrating a company anniversary, or as a gesture for clients you already have a relationship with. At trade shows, the simple ABS base, priced between €6 and €14 per unit, is ideal, while the 3-in-1 station or Qi2 magnetic charger makes sense as a complete gift for a committee or large accounts. If you're setting up a stand, also check out our event, trade show, and conference merchandise.
It pairs well with what's already on the desk: a notebook, pen, and bottle or mug in the same colour create a cohesive set without repeating the logo five times. You can view the formats in customised bottles and mugs for companies and package everything inside the Pekata box, with a band and card, like any of our other customised corporate gifts with your logo.
Frequently asked questions
How much does a customised wireless charger with my company's logo cost?
A 10 W Qi base in ABS is around €6-14 per unit with the logo applied. A bamboo or cork base is €10-20, a 15 W Qi2 magnetic charger is €15-30, and a foldable 3-in-1 station is €25-45. These are indicative prices excluding VAT and improve with volume.
Is there a minimum order for customising chargers?
The minimum order is 25 units: we produce from 25 units. You can order 10 chargers for a small team or 1,000 for the entire staff with the same design. What changes with volume is the price per unit, as the cost of setting up the marking is spread over more pieces; the process is identical.
How long does it take for a customised charger order to arrive?
Typically, it takes two to four weeks from when you approve the preview, depending on the model and quantity. If the item is imported or the volume is large, expect five or six weeks. These are indicative timeframes: models with lithium batteries almost always travel by road and add days outside mainland Spain, and in November and December, it's wise to finalise the order with more leeway.
What marking technique is used on a wireless charger?
On bamboo, cork, and aluminium, laser engraving is used: it doesn't fade and leaves the logo in a toasted or silver tone depending on the material. On ABS and faux leather, digital UV printing is used, which allows for multiple colours and gradients. On a round base of about 10 cm, the usual marking area is 30 to 40 mm.
Can each person choose their model or colour?
Yes. You offer two or three options, such as a bamboo base and a Qi2 magnetic charger, and each employee selects theirs on the Pekata portal, in their language. They also provide their address there if delivery is to their home, so HR doesn't collect data via email, and you receive a single invoice.
Request your personalised preview
In the online catalogue you upload your logo, see every product already branded and get the price instantly, from 25 units. If you would rather we prepare it for you, request a quote.